September 10, 2018

We are happy to let you know about new release of USB over Ethernet version 3.5 today! In this version we have added support of the newest Windows 10 systems, optimized redirection of some devices, fixed a number of issues and improved command line support. It is a free update for all of our users who own a v3 license. If you have a license for one of the older versions, please don't hesitate to contact us for update.

New features in this release:

• Full support of newest versions of Windows 10.
• Optimized redirection of USB Mass Storage devices on slow and/or high-latency connections.
• Optimized redirection of Wacom signature pads on slow and/or high-latency connections.
• Improved performance when redirecting large number of USB devices simultaneously.
• Added support of IgnoreHWSerNum registry flag on USB client side.
• Added possibility to minimize the program instead of closing on [Õ] button.
• Added possibility to add and remove remote servers and callback connections via command line.
• Multiple user interface improvements, including high DPI support.
• Multiple general stability improvements.
• Multiple general optimizations.

Bugfixes:

• Fixed issue on USB client with multiple callback connections from the same IP address.
• Fixed memory leak on USB server.
• Fixed issue on USB server that could lead to BSOD when device is unplugged while still connected to a client.
• Fixed issue on USB server that could lead to a hang in device detection process, thus preventing newly attached devices from being detected.
• Fixed issue on USB client where system stopped detecting redirected USB devices until reboot (devices did not appear in Device Manager).
• Fixed issues with user-mode USB IOCTL requests on USB client that could prevent third-party software from detecting redirected USB devices.
• Fixed issue on USB client where redirected device did not start after re-installing its driver.
• Fixed BSOD on USB client when disconnecting Android smartphone.
• Fixed issue where Force Disconnect was not working for inactive devices.
• Fixed BSOD on USB server when Driver Verifier is enabled for USBHUB3 driver.
• Fixed issue where service could hang in undefined state at startup if one of USB devices hang during sharing.
• Fixed BSOD on USB server on Windows 10 when unplugging a USB3.0 hub with devices attached to it.
• Fixed problem where 2-digit port numbers were displayed reversed (e.g. 01 instead of 10).
• Fixed BSOD on USB server on Windows 8 and newer systems when redirecting webcams.
• Fixed issues on USB server when system restores after sleep.
• Fixed issue where device could be shown with invalid state when Inactivity Timeout is enabled.
• Fixed security issue on USB client side that could lead to system crash.

December 12, 2016

Today we are happy to present the new release of USB over Ethernet software, version 3.3! This version contains a lot of improvements, including full Windows 10 support and more advanced USB redirection technology. It is a free update for all of our users who own a v3 license! If you own a license for one of the older versions, please don't hesitate to contact us for update.

New features in this release:

• Added full support of Windows 10.
• Added possibility to hide devices that were denied for sharing or connecting.
• Added support of Renesas/NEC USB 3.0 controller on Windows 7 and older systems.
• Added support of AMD USB 3.0 Host controller on Windows 7 and older systems.
• Optimized redirection of Wacom STU signature pads.
• Improved support for host names with dynamic IP addresses in IP Filters.
• A number of user interface improvements.

Bugfixes:

• Fixed issues with callback connections.
• Fixed problem where devices did not share after upgrading the system to Windows 10 or installing a roll-up update.
• Fixed problem where USB 3.0 Mass Storage devices may not work in UASP mode.
• fixed problem where applications were not able to access redirected Sentinel/HASP security dongle.
• Fixed "Code 10" error in Device Manager on USB client side with some devices.
• Fixed BSOD when stopping USB over Ethernet service on systems which have only USB 3.0 ports.
• Fixed minor memory leak.
• Other stability improvements.

Whats new in USB over Ethernet 3.0

We are happy to announce the release of USB over Ethernet version 3.0 today. This release takes USB over Ethernet to the new level of USB redirection!

New in this version:

• Windows 8 and 2012 are now fully supported.
• USB 3.0 support.
• Compression support.
• Improved callback support.
• Device Policy.
• Better command-line support.
• Refreshed user interface.
• Greatly improved stability.
• A number of performance optimizations.

Update Now!